STEPPER MOTOR CONTROLLERS
We offer a large selection of different types of stepper motor controllers from several international agencies. Below you can see the range of our stepper motor controllers.
Stepper motors consist of electromagnets centered around a shaft that alternately receive voltage. A stepper motor typically has 50 to 100 electrical poles that are activated in steps. A full rotation is thus divided into a series of steps – hence the name ‘step’ motor. This stepwise constant motion means that a stepper motor is often controlled by open-loop, thus eliminating the cost and complexity of an encoder.
We can of course put together the motor control with electric motor, gear and accessories that are necessary for your particular project. Contact us for a non-binding talk about your project – with us you get expert advice with more than 35 years of experience.
GCM stepper motor control
Read more
GCM has developed its own stepper motor controller. The motor controller can be used for a wide range of applications with the possibility of additional accessories such as encoder. Our software engineers can make sure that the motor controller is programmed specifically for your stepper motor and your needs.
| Max power | 60 W |
| Supply voltage | 12-30 VDC |
See catalog ▸
Electrocraft stepper motor controllers
Read more
Electrocraft motor controllers can run the motor at both full step and microstep.
| Max power | 500 W |
| Supply voltage | 11-48 VDC |
See catalog ▸
miControl MCDSA-S4X
Read more
The stepper motor controllers from German miControl are particularly suitable for stepper motors with speed control and positioning. The devices are easy to configure and program and can be used for CANopen, PROFIBUS DP, EtherCAT and Modbus RTU protocols. The stepper motor controllers also have a built-in MPU (Motion Process Unit), which allows instructions to be stored without the need for an external PLC.
The mcDSA-S4x family is designed for stepper motors that require high power. These provide an output of up to 20A and fit directly into a DIN rail.
| Max power | 600 W |
| Supply voltage | 9-30 VDC |
See catalog ▸
miControl MCDSA-S6X
Read more
The stepper motor controllers from German miControl are particularly suitable for stepper motors with speed control and positioning. The devices are easy to configure and program and can be used for CANopen, PROFIBUS DP, EtherCAT and Modbus RTU protocols. The stepper motor controllers also have a built-in MPU (Motion Process Unit), which allows instructions to be stored without the need for an external PLC.
The mcDSA-S6X is one of the most compact stepper motor controllers on the market (with dimensions of 74×45.5×14 mm and a weight of just 30g). Despite its compact design, this stepper motor controller delivers an output of up to 10A.
| Max power | 300 W |
| Supply voltage | 9-30 VDC |
See catalog ▸
Phytron 1-Step Drive
Read more
Phytron stepper motor controllers are suitable for applications where high precision and performance are required. Phytron’s stepper motors are used in electronic microscopes and paper production machines – in both applications, precision is paramount.
The 1-step-drive module is a fully integrated, powerful and high precision positioning controller for 2-phase stepper motors.
The module is quickly ready for use via the STEP7 software solution, where it is quickly and easily configured.
- Up to 1/512 microsteps
- STEP7 programming
- Plug and play solution for SIMATIC ET 200S
| Max power | 240 W |
| Supply voltage | 24-48 VDC |
See catalog ▸
Phytron MCC-2
Read more
Phytron stepper motor controllers are suitable for applications where high precision and performance are required. Phytron’s stepper motors are used in electronic microscopes and paper production machines – in both applications, precision is paramount.
The Phytron MCC-2 offers programmable control in a compact size for 2-phase stepper motors.
- Digital/analog
- Up to 1/256 microsteps
- Stand-alone
| Max power | 170 W |
| Supply voltage | 24-48 VDC |
See catalog ▸
Phytron MCC-2 LIN
Read more
Phytron stepper motor controllers are suitable for applications where high precision and performance are required. Phytron’s stepper motors are used in electronic microscopes and paper production machines – in both applications, precision is paramount.
The Phytron MCC-2 LIN offers programmable control in a compact size for 2-phase stepper motors.
- Low noise
- Digital/analog
- Up to 1/256 microsteps
- Stand-alone
| Max power | 80 W |
| Supply voltage | 24-48 VDC |
See catalog ▸
Technosoft stepper motor controllers
Read more
Technosoft motor controllers are designed to control three types of motors; brushless, brush and stepper motors.
RS-232 and CAN/CANopen. A sophisticated but easy-to-use software package makes it possible to program motor data and motion.
| Effect | 25-640 W |
| Supply voltage | 6-80 VDC |
See catalog ▸